Handheld sprayer manufacturers' products are very common in our lives, and we should pay attention to its correct operation when using it, but what causes it to deform when it is used?
The deformation phenomenon is generally caused by the heat problem. If the liquid or the object injected into the bottle is too hot, it will cause deformation. There is also the deformation caused by mutual dissolution and weight loss. Of course, we can't rule out the deformation caused by the negative pressure caused by oxidation. The unknown impurities in the raw materials often oxidize with the oxygen in the air left in the bottle. Gradually, it will cause negative pressure and deformation.
Therefore, we must pay attention to its correct use when using it, and should pay attention to maintenance in peacetime, so as to better play its effect and extend the service life.
- All
- DYNAMIC
- EXHIBITION
What factors will cause the sprayer to deform
2023.11.27
WHAT'S NEW
Provide you with the latest enterprise and industry news
-
How does the nozzle design contribute to the fineness of the mist produced by mist sprayers?
The nozzle design is a critical factor in determining the fineness of the mist produced by mist sp...
-
How is the misting effect achieved in mist sprayers?
The misting effect in mist sprayers is achieved through a combination of factors related to the desi...
-
Can trigger sprayers be used for both household and commercial applications?
trigger sprayers are versatile and can be used for both household and commercial applications. Thei...
-
What factors determine the dispensing volume or dosage of a screw lotion pump?
The dispensing volume or dosage of a screw lotion pump is determined by several key factors, which...
-
What is the typical shelf life and durability of Liquid Soap Screw Lotion Pumps
The shelf life and durability of liquid soap screw lotion pumps can vary depending on several fact...
-
How is the dosage or dispensed volume adjusted with treatment pump,and are there variations in dosage options?
The dosage or dispensed volume of a treatment pump can typically be adjusted to meet specific appl...