What are the characteristics of spray pump head design

In addition to thinking about the quality of the product itself, the cosmetic packaging brand also pays attention to the main points of its packaging. The unique hard plastic pump head has become an important point of attention for more and more brands to be sharp. Cosmetic products such as facial scrubs, roller eye creams, waxes and anti-fat emulsions rely largely on those easy-to-use and convenient packaging plastic pump heads to obtain outstanding benefits. If you want to make your own Liuhe in many self-maintenance brands, is the plastic pump head enough to conceive? Is it easy to use? It has become a key element for the brand to break out of the ocean of cosmetics.
 
    The spray pump head is used to spray the liquid in the form of aerosol, so that it can be extended to the liquid on a larger scale, and the aerosol is very uniform and well absorbed. These are only some of the advantages. The usual spray head will be considered for planning flexibility, and the size of the aerosol spray and the size of the masking size can be changed according to customer needs.
 
    The spray pump head has been modified and processed by a series of professionals, so that it can easily deal with the time when it sprays a relatively viscous liquid. After the operator adjusts the pump head as needed, although the size of the sprayed gas mist is changed, it will not affect the total amount of spray, and then will not affect the application power, so the brothers to apply need not worry about this.
 
    The reason for choosing a spray pump head will be water flow, spray viewpoint, etc., and these elements are usually mutually controlled. The water flow and pressure, the point of view of the spray and the size of the mask are proportional. The purpose of each pump head is to continuously make the bath and the workpiece touch, and the flow rate is more important than the pressure.
 
    Although the temperature of the liquid will not affect the spray efficiency of the pump head, it affects the viscosity and specific gravity, and also affects the choice of data. The raw material of the pump head should also be determined according to the chemical characteristics of the bath. For the bath with no corrosion performance, it can be bronze cast or plastic pressed according to the degree of difficulty in manufacturing.

https://www.sprayerchina.net/